The Losi TEN-SCTE Bump Chassis is hard anodized and made in the USA on Haas machinery from 7075-T6 aluminum. This chassis is designed for the electric version of the truck. It eliminates the plastic adaptor plate and holes that are needed for the nitro version, and relocates the battery box 1/2" towards the back for better balance.

The 'Traction-Tuned' chassis gives the racer more tuning options for different track conditions. The center section is stiffer to prevent bending, but the rear section can be allowed to flex more or less than the stock chassis with different rear chassis bracing. The stock rear plastic brace gives the truck more rear traction and a smoother ride on rough surfaces. The optional Bump CNC Delrin rear brace (BRCB2426) reduces flex and the truck will rotate more through the corners with less steering input.

Features:

• Battery box relocated 1/2" towards the rear for better balance.
• Made in the USA with 3.2mm thick 7075-T6 aluminum.
• Stronger and 20% lighter than the stock chassis.
• Stiffer center section to prevent bending.
• 'Traction-Tuned' rear section for more tuning options.
• Weight reducing pockets were designed and tested to reduce weight as much as possible and sill retain stiffness where needed.
• Area under the spur gear is enclosed to keep the dirt and rocks out.
• Pre drilled for the Bump Delrin rear chassis brace (BRCB2426), or the Losi Option rear chassis brace (LOSB2426).
• Includes instructions and screws.

 Chassis Kit also includes:

• Four 8-32 x 3/8" flat head screws (replaces screws for differential mounts).
• 5-40 x 1/4" flat head screw (shorter screw for under motor).

Note: For more rotation in the corners use the Bump Delrin rear chassis brace. For more rear traction use the stock plastic rear chassis brace.