The success of the electric
Inferno VE buggy was built on the design DNA of the multiple World Championship
winning Inferno, now the VE has been taken to the next level with Inferno VE
Race Spec. The burst of high-torque acceleration from the “Team Orion Vortex 8
Brushless System” can be felt immediately upon take off. Big Bore shocks and
front / rear stabilizers come standard on the new Race Spec VE. Also fumbling
around with crystals are a thing of the past with the newly developed Syncro
2.4GHz radio system that automatically delivers faster interference free control
for the most advanced performance and technology in an electric racing buggy.
Developed in collaboration with Team Orion’s Oscar Jansen in 40 degree (Celsius)
heat of the World Championship track in Thailand, this
machine is designed for quality 1/8 buggy performance under the most extreme
conditions, straight out of the box!
Compatible with most 7.5 series parts
- Heavy Duty Spiral Cut Ring /
- Adjustable Turnbuckles
- Front and Rear Molded Chassis
- New Super High Air Flow Body
- Die-Cast Motor Mount
- CNC Machined Steel Pinion Gear
- Front Universal Driveshafts
- EZ Gear Mesh Motor Mount
- Team Orion Vortex 8 System
- Center Drive Shaft Guard
- Super Deans Plugs
- 10 Gauge Wire
- Anodized Aluminum Shocks
- 17mm Wheel Hubs
- Rear, Center and Front
- Real Time 4WD
- Syncro 2.4GHz - A stylish
FHSS 2.4GHz rc system featuring dual rate function all pre-installed in the
Inferno VE Race Spec. also features a 4 channel receiver, providing a high
range of upgrades.
- High Torque - Equipped
with a high torque KS-102BK servo for the best performance right out of the
- New Threaded Big Bore
Shocks - Features heavy duty big bore oil shocks are included as a standard
equipment. Takes even the harshest punishment for long periods without
buckling and provides excellent damping power. Strong 3.5mm shafts in the
Big Bore Shocks deliver smooth and effective damping for sure-footed
performance on a wide range of surfaces.
- Large Diameter Wheels -
The new VE Race Spec comes equipped with the same strong wheels as the MP9
- New Kyosho Tires - New
micro-square pattern tires are pre-mounted giving you full traction on a
wide range of surfaces.
- Super Air Flow Body -
Includes a factory-painted body that efficiently channels airflow for a
greater aerodynamic effect.
- Flexibility & Rigidity -
Composite torque rods in front and rear deliver optimal flexibility and
rigidity along the chassis, increasing the effectiveness of the suspension
for greater traction and consistent handling.
- Full ball Bearings - Full
ball bearings throughout the entire chassis for maximum efficiency.
- Tough Buggy -
Factory-assembled chassis shares the same tough characteristics and low
center of gravity as the World Championship winning Inferno 7.5.
- 4WD - Shaft-driven 4WD
chassis with three differentials.
- New Arms - New thicker
suspension arms adds overall strength to the already robust nitro platform.
- Spiral Gears - Precision
machine-cut metal spiral gears in the front and rear differential ring and
pinion delivers superior reliability, strength and efficiency.
Mud Guards - Mud guards are installed on the rear suspension arms to
prevent dirt from collecting on the drivelines and getting inside the
wheels. Each aspect of the Inferno VE Race Spec has been carefully
considered to perform under true racing conditions.
- 550 Size Motor
- 2040 KV
- Continuous Current: 85A
- Peak Currenty: 160A
- Max RPM 60,000
- 5mm Heavy Duty Shaft
- Cooling Fins
- Sensorless Brushless Only*
- Compatible with 6-12 Cells (NiMh)
and 2S - 4S (Lipo)
- BEC Voltage 6V
- BEC Current 3A
- Continuous Max Current: 120A
- Peak Current: 160A
- Over Input Voltage Protection
- Low Voltage Cutoff is programmable
(Auto Detect 3.0Vper.Cell)
- Thermal Prtection at 96c
- Dimensions (WxL) 58x47mm
- Pre-Assembled Chassis
- Pre-Painted Body
- Team Orion Vortex 8 Motor
- Team Orion Vortex 8 ESC
- Syncro FHSS 2.4GHz RC System
- Cross Wrench
- A Readyset is a fully assembled
model that includes nearly everything you need to run. Body Color scheme is
complete so only consumables like batteries and 7.4v Lipo/7.2v NiMh are
required so you can start operating the model without delay.