The HYPER STAR Pro kit (unassembled) is loaded with a lot of innovative new
features improving handling, suspension, and balance. A front Pivot ball
suspension system and a B-Type rear suspension has been installed to give you an
ultra smooth steering performance and balanced rear traction. Handling in high
and low speed cornering has been increased with front and center spider diffs
and 17mm big bore shocks. CNC chassis braces have been added to keep the chassis
rigid and firm but with enough flex to keep handling spot on. A lightened T7075
CNC aluminum chassis and captured steering links from the steering rack to the
steering knuckle are some of the other vast amount of upgrades made to make this
kit the high performance buggy of choice.
The Hyper Star incorporates a front Pivot Ball Suspension design, also
referred to as PBS. This PBS suspension gives the Hyper Star a pro feel and
adjustability not found in front C-Hub designs. The large CNC aluminum pivot
balls are attached by steel threaded shafts making the connection to the nylon
knuckle super strong and light weight. Also noted in the picture, you can see a
clean arm design flow with attention to detail. Transmission power is provided
to the front wheels by a pair of harden steel universal axles supported by large
8x16mm ball bearings.
Hard-coated and threaded, the 17mm big bore shocks provide smooth performance
and long stroke travel for tough conditions, rough tracks and super cross style
jumps. Add that to the 4mm shock shafts, dust boots and adjustable collars for a
good shock package.
Brakes have been updated with ceramic materials for strong stopping power
along with beautifully crafted CNC brake discs. Getting the buggy down to speed
or helping with articulation off a jump will not be a problem with these
The newly designed center mount is one molded piece that keeps the center
spider gear protected from hard braking and acceleration. The top aluminum plate
is eliminated to reduce weight. The brakes are fully covered with a shroud to
keep the brake pad dry even when overfilling your fuel tank.
The Hyper Star big includes two chassis braces. These CNC braces give
strength to the centerline of the chassis for those demanding tracks. Lightened
and nicely etched, the braces come standard in the kit.
Hyper Star's engine sits at 25 degrees of angle. This gives the chassis a
better centerline stance without sacrificing the centered driveline allowing the
center front and rear universals to be straight and bind free. This signature
Hyper 9 design also offers centerline balance for those high CG engine cooling
The newly designed radio box packs a lot of features. The flip lid gets you
to your battery and receiver. A spring loaded antenna mount ensures no broken
antennas. A mount for your switch and integrated transponder holder/lid so
if you can't remember your transponder number you can get easy access.
- Front Pillow Ball Suspension
- Ceramic Brake Pads
- Front and Center Spider Differentials
- Front, Center and Rear Universals
- 4mm CNC Lightweight 7075 Chassis
- CNC Chassis Stiffeners
- Easy Access Radio/Battery Box
- Lightweight Pillow Balls
- 3-Shoe Clutch
- Clear Body
- Length: mm
- Width: 310mm
- Wheelbase: to mm
- Gear Ratio: 3.91
Needed to Complete:
- Radio w/Receiver
- Two Servos w/150oz of torque or more.
- Engine and Pipe