Tekin's RX8 is big
power in a small package. Based off of the proven RS series Speed Control the
RX8 takes large scale current demands in stride. Leading the industry not only
in power handling ability but size and features with Drag Brake, Neutral width,
Throttle Profiles, Voltage Cut Offs for Lipos and much more. The RX8 sits at
only 1.5 x 2.22 x 1.46, a small foot print making it easy to install on any
chassis. Don't negotiate the track, attack it with extreme prejudice.
FEATURES:
- Easily Access Programming, Anywhere,
Anytime
- Drives Sensor/Sensorless Brushless and Brushed Motors
- D2: Dual
Drive Mode Technology
- On-Board Temperature Indicator
- PC Interface for
Custom Programming
- HDAC: High Density Copper Fet Boards
- Sensor Plug
for Precise Commutation with all Motors
- Solder Posts for Easy Wire
Replacement
- Self Test Diagnostics and Factory Reset
- Adjustable Drag
Brakes
- RS-232 Digital Communications Protocol
- Pit Tune Mode
-
DGF2: Digital Glitch Filtering V2
- QuickTune Programming
- One-Touch Radio
Calibration
PROGRAM FEATURE:
- Drag Brake (13 steps) - Brake / Reverse Strength (13
steps) - Current Limiter (none + 12 steps) - Neutral Width (7 steps) -
Throttle Profiles (7 choices) - Motor/Reverse Type: Brushless, Brushed, No
Rev, Rev Delay - Voltage Cutoffs (none, 2s, 3s, 4s, 6s, Custom) - Timing
Advance when used with Tekin Hotwire
- Extensive
Tuning via Tekin HotWire
PC Interface (sold separately)
RX8 SPECS:
Controls: Forward/Brake/Reverse
Input
Voltage: up to 6S Lipo
Continuous
Current: 210 Amps*
BEC:
6.0V/5.0A
Motor Limit Brushless Mode: No
Limit
Motor Limit
Brushed Fwd Only Mode: No Limit
Motor Limit Brushed Fwd/Rev
Mode: No Limit
Throttle Profiles: 7 choices (on
board)
Brushed
Modes: Fwd Only, Fwd/Rev, Rev Delay
Brushless
Modes: Fwd Only, Fwd/Rev, Rev Delay
Dimensions: 1.5 x 2.2 x 1.4"
Weight
Approx: 2.7oz |
