Back
 
Hyper 8 Tech Tips
 
Tech Tip 1. Replace stock steering rod balls with older Hyper 7 balls. Need part #19055 (Pivot Balls) and #94022 (Flathead Screws).

    
The new ball breaks at the threads.                                             The old ball has a screw going all the way through.
 

  
 
Tech Tip 2. Upper rear shock tower mounting screw will pull out. Cut the bulkhead and insert nut and use a machine screw to hold shock tower.
 

                                 Short shock tower (old)                                                             Tall shock tower (new)
Front Upper Arm Conversion
Tech Tip 3. Jeremy Kortz has been using this setup with great success (No binding in suspension)
                    Part numbers for setup: #28031, #28030, #94020, #10290