Castle Phoenix Edge 100, 34V 100-Amp ESC w/ 5-Amp BEC
Castle Phoenix Edge 100, 34V 100-Amp ESC w/ 5-Amp BEC

Castle Phoenix Edge 100, 34V 100-Amp ESC w/ 5-Amp BEC

Your Price: $118.96
Part Number: CSE010010000
Availability: In Stock

This is the Castle Creations Edge 100 34V Esc (part #10010000) for remote controlled R/C cars.

Applications:

Helis:     500 Class, 550 Class, or 600 Class (use external BEC or RX/servo power source; not included)
Fixed wing:     .40 - .90

Technical Specs:

  • Input voltage:     MIN: 2S LiPo MAX: 8S LiPo
  • Max continuous amperage at full throttle:     100 amps*
  • BEC voltage (voltage regulator for powering radio and sevos):     User selectable choice from 5 to 8.4 volt output
  • BEC output amperage:     5 amp peak**

Size and Weight:

  • Width:     2.0" (50.8mm)
  • Length:     2.8" (71.9mm)
  • Height:     0.9" (23.2mm)
  • Weight w/wires:     4.5 oz (126.6g)
  • Weight w/o wires:     2.6 oz (72.9g)

Miscellaneous:

  • Programmability:     Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Castle Link USB adapter included in package) and freely downloadable Castle Link Windows software.
  • Castle Field Link Programming Card (sold separately) compatible for select functions.
  • Connectors:     Battery and motor connectors sold separately


Tools needed for installation:    

  • Soldering iron and solder to attach bullets to motor wires and battery connector to power wires.


*RC HOBBY APPLICATION RATING: 100 amps for the duration of a single 5,000 mAh battery pack with the ESC in contact with a 5 mph airflow of 25C (77F) or cooler air. Controller temperature must never exceed 100C (212F). Exceeding current or temperature ratings may damage components and may shorten the life of the ESC. Always verify system current draw at full-throttle. Decrease load or increase airflow to decrease the ESC’s operating temperature.

**Peak indicates amperage sustainable for 0.5 seconds – long enough for most servos’ current draw transients. Your setup may vary. Always confirm servo current draw before the first flight of the model.

Recently Viewed Items

TOP
0 Items