The Valiant 1.3m park flyer is a downsized version of the big Hangar
9 Valiant 30cc ARF. Like its giant-scale sibling, it has the inherent
stability of a classic high-wing model but with more modern lines and
larger control surfaces that can provide sporty response when you want
it. This Bind-N-Fly® version comes with the added benefit of a Spektrum™
AS3X receiver that features optional SAFE Select technology.
Versatile Performance and Functional Flaps
Some days you just want to unwind with some touch and gos. Others,
you want to push the limits with aerobatics. The model's light wing
loading, functional flaps and powerful brushless motor give you a big
performance envelope to play with so, mild or wild, you can do it all.
High-Output Brushless Power System
The high-output power system delivers thrilling performance when
matched with a 2200mAh 3S 11.1V 30C LiPo battery. You can use a wide
variety of other 3S battery sizes too. The big, easy-to-access battery
compartment can accommodate everything from 1300mAh to 3000mAh packs.
Optional Float Set Available Separately
The model is designed to accept an optional float set. Installation
takes just a few minutes and all the necessary hardware is included.
AS3X Receiver with Optional SAFE Select Technology
The model's AS3X (Artificial Stabilization - 3-aXis) receiver works
behind the scenes to smooth out the effects of wind and turbulence. The
result is a sense of stability and precision that makes you feel like
you're flying an expertly tuned aircraft.
If you're a relatively new pilot or want an extra margin of safety
while familiarizing yourself with the airplane, you can enable the
optional SAFE Select technology built into the receiver. No programming
is required. Simply change up the binding sequence as directed in the
With SAFE Select features enabled, you get:
Pitch and Bank Angle Limits
- These keep the aircraft from rolling or pitching upside down. They
also prevent excessive climb or dive angles during takeoff and landing.
- Instantly returns the wings to level when the sticks are released.
Easy Switch Assignment - No Programming Required
- The simple procedure for assigning a transmitter switch to turn
SAFE Select features on and off doesn't require any programming and
takes just a few seconds.
If you don't want to enable the SAFE Select features, just bind the
receiver normally and it will function like a standard AS3X receiver.
You can even fine-tune its AS3X settings if you have the Spektrum
programming interface and a compatible programming cable (both available
Needed to Complete:
- Full-range, 5+ Channel DSMX®/DSM2® transmitter
- 1300-3000mAh 3S LiPo flight battery
- 3S compatible LiPo charger