Never lose a shock spring again with these locking shock spring perches and
rod ends. An all new design that mates up perfectly with our durable new
captured shock boots (TKR6143, TKR6144, TKR6145) will ensure your suspension
stays consistent throughout any race or run. The spring perches rest on a shelf
around the rod end instead of directly on top of the rod end. The result is less
interference from the shock boot and absolutely no sacrifice in up travel. Each
spring perch / rod end is secured by an M3x10mm set screw (TKR1605).
NOTE: Requires the use of captured shock boots (TKR6143, TKR6144, TKR6145).
Shock boots should be installed before the rod ends are attached to the shock